Project cost calculator
A preliminary planning range for Denver-metro and Colorado projects. Budgetary estimate only — not a quote. Every figure is subject to a site visit and a written scope.
Project details
New single-family home on your lot, priced per square foot of finished area.
Current planning range: $982,000 – $1,930,000
1,000–8,000 sq ft
Selections such as cabinetry, tile, fixtures and exterior products.
Mountain sites add travel, delivery, snow-load and seasonal constraints.
Performed by independent architects, designers and licensed engineers — not in-house.
Fees and review scope are set by the jurisdiction for your address.
Preliminary planning range · Custom Home Construction
$982,000 – $1,930,000
≈ $351–$689 per sq ft, all lines included
Broad calculator planning assumption (not a published figure). A site visit and written scope are required for a real number.
The lower end includes a preliminary planning allowance. Final price depends on the agreed scope and site visit; this is not a quoted discount.
| Construction (structure, envelope, systems, finishes) | $980,000 – $1,470,000 |
|---|---|
| Site work & utility connections allowance | $20,000 – $50,000 |
| Architecture & structural engineering (independent) | $49,000 – $145,000 |
| Permit, plan review & tap-fee allowanceWater/sewer tap fees vary widely by district. | $10,000 – $45,000 |
| Contingency (10–15% of construction)For concealed conditions. Applied to construction lines only — not to design, permit or allowance lines. | $98,000 – $220,000 |
| Rounded planning subtotal | $1,155,000 – $1,930,000 |
| Lower-budget planning allowance (~15% of low end)The lower end includes a preliminary planning allowance. Final price depends on the agreed scope and site visit; this is not a quoted discount. | −$173,000 at low end · $0 at high end |
Custom homes are priced from drawings. Use this range to test feasibility before paying for design.
Request detailed estimateJumps to the short request form below, with this calculation already attached. Nothing is sent until you submit that form.
Request a detailed estimate for this calculation
Add your contact details and we'll follow up. Your current custom home construction calculation is attached automatically when you submit.
Typically included
- General construction from foundation to finishes
- Coordination of licensed trades
- Permit and inspection sequencing
Not included in this range
- Land purchase and closing costs
- Furniture, window coverings, landscaping design
- Utility company line-extension charges beyond allowance
- Sales and use taxes not billed through construction
What moves the number
- Plan complexity and roof geometry
- Soils report and foundation type
- Utility availability and lot slope
- Finish selections
How these ranges are built
Method last reviewed October 7, 2026. The only published dollar anchors on this site are in our 2026 Denver metro home addition cost guide: $250–$500 per sq ft of new conditioned space for construction, before design, permits and site work; $325–$550 per sq ft for second-story additions; $12,000–$30,000 for design and engineering; and 10–15% contingency on construction. Additions and second stories use those per-sq-ft figures directly, with design, permits and site allowances shown as separate lines. Sunroom results are broad assumptions cross-checked against the published $45,000–$150,000 sunroom band. Contingency is applied to construction lines only — never to design, permit or allowance lines — and optional extras are off until you select them.
The lower end of each result also includes an additional planning allowance of about 15%, shown as its own line after a rounded planning subtotal; the upper end is unchanged. The published guide assumptions above are preserved. The reduced lower end is a planning figure, not a confirmed bid.
Every other service uses deliberately broad calculator planning assumptions, not supplier prices or past customer quotes. Our whole-house renovation cost guide explains why renovation has no honest per-square-foot figure — so those results are wide on purpose. Deck and basement guides explain the cost drivers behind those categories without publishing prices.
Important limits of this estimate
- This is a budgetary planning estimate only. It is not a bid, not a binding quote and not an offer. Pricing is confirmed only after a site visit and a written scope.
- Design, architecture and structural engineering are performed by independent licensed professionals, not in-house. Electrical, plumbing, mechanical and roofing work is performed by licensed trade contractors and coordinated by Abricos LLC.
- Permits, plan-review fees and use taxes are set by the jurisdiction reviewing your address. Sales tax treatment, hidden damage, site work, trade-capacity upgrades, demolition surprises and material selections can all move the final number.
- The calculator runs in your browser and does not collect or store any personal information on its own. Your contact details and the current calculation are sent to Abricos LLC only if you explicitly submit the request form on this page. The calculator is separate from any glass or shower-door pricing tool offered by other businesses.